Area of application:

Dry plaster mix based on gypsum binder with additives providing increased adhesion, designed for manual plastering of concrete, brick walls and ceilings.

Substrate preparation:

The substrate and room temperature must be at least +50C. The substrate must be dry, cleaned of dirt and dust. Remove unstable, crumbling and peeling substrate. Protect metal surfaces from corrosion.

Procedure:

Pour 10-12 l of clean water into a clean container. Pour one sack of the dry mortar into the container. Mix with a construction mixer until a homogeneous mass is obtained. Mix with a construction mixer until a homogeneous mass is obtained, setting time approx. 30 minutes.

Directions for use:

The dry building mix is applied to the surface by hand and smoothed with a trowel. One coat thickness is 5 to 10 mm. The following layer may be applied after the previous one is completely dry.

Material consumption:

If the thickness of the applied layer is 5 mm, the material consumption is 5 kg per 1m2 of surface.

Storage:

Store in a dry room on wooden pallets.

Guaranteed shelf life 6 months.